|
Here is a list of supplies, vendors, resources, shops, etc. that offer products
and services to Aeronca K and E-113 owners. These names are provided for your
reference. By placing these names here does not necessarily mean that I endorse
them.
I post these references for free to anybody who provides products or services
specifically for the Aeronca K or E-113 series engines. I reserve the sole right add
or removal items for any reason. Also, I encourage K-owners to provide feedback
information, good, bad, or indifferent on their experience working with a resource listed
below.
| Company |
Product or Service |
Airwolf Aviation Parts
P.O. Box 6771
Ventura, CA 93006
Phone: (805) 647-4475
Fax: (805) 647-4178
email: cepetro@venturalink.net |
Airwolf, who at the present time makes FAA approved parts for
helicopters and fixed-wing aircraft, has offered to make FAA approved PMA parts for the
E-113 series engine. In order to do this at a reasonable price, they must know your
needs. For example - if enough people need rocker arm rollers and pins they will let
you know if they can do it and for what price through this web site. |
Harbor Products Co.
2390 Crenshaw Blvd. Suite 164
Torrance, CA 90501-3348
Phone (310) 325-5304
email: hrbrprds@earthlink.net |
Made in America Aeronca K Model Wheel Pants. Made
dimensionally authentic from copies of original Aeronca Co. drawings to fit the 18 x 8 x 3
tires or the cub tires if wheel adapters are used. The ultimate in fiberglass wheel
pants. Made with gray primer gelcoat then 3/4 ounce fiberglass mat followed by 7
ounce fiberglass cloth. Aft bulkhead standard with 1/2 inch flanges. Axle hole
locations and cut out for landing gear mounting brackets clearly marked. All rivet
head locations and welding seams molded in. Example can be seen on the EAA
Aeronca K on display at Pioneer Field in Oshkosh.
Click on thumb-nail pictures to see full size photo.
View of right inside wheel
pant, painted and installed. (35k)
|
Left Wheel Pant, painted
(28k)
|
Right outside wheel
pant, unpainted
(70k)
|
Left inside wheel
pant, unpainted
(50k)
|
Drawings of all mounting braket hardware and reinforcements are available.
|
| |
|
|
