|
AERONCA Memo M-26
11-8-37 M-26 MEMORANDUM TO OWNERS OF AERONCA MODEL K SUBJECT: CABIN HEATER In order to avoid any possibility of fouling between the hot air outlet of the cabin heater and the control column on the subject model airplanes it has been found advisable to shorten the outlet tube. To shorten the tube remove the engine cowling and loosen the clamps which hold the hot air tube to the heater and the firewall. Move the tube forward so that not more than four (4) inches extend into the cabin to the rear of the firewall. The firewall clamp can then be tightened. The forward end of the tube can then be cut off to the proper length and clamped in the heater after the cowling has been replaced.
AERONCA AIRCRAFT CORPORATION MIDDLETOWN, OHIO
AERONCA "K" and AERONCA E-113 Engine Web Site |